...Here is possible problem: From time to time I have the same problem it usually happens when the rubber paper feed rollers become very shiny so the paper does not feed properly. The printer not ...
...Printers last only 2-3 years especially if used regularly. Further, It could also be that the rubber (that which turns to pull the paper out) has become slippery due to coating used in many ...
Question about PIXMA iP1800 InkJet Photo Printer
...or it is defective. Check that there is not too much paper in the tray. Many time the little rubber rollers that grab the paper become glazed and will not pick the paper up. Also, the feed ...
Question about PIXMA MP160 All-In-One InkJet Printer
...rubber that gets less 'sticky' with age and the rollers become fouled with paper fibers that insulate the rubber from the driven sheet. Cleaning the rollers (on most, some disassembly required) may ...
...I would check the paper guides on the paper stand, then check the path, turn it upside down and look for debris, I once found my childs sticky sweet in mine. Then try to clean any rubber
Question about PIXMA MX870 Wireless Office All-in-One InkJet Printer
...rubber creases paper causing it to jam It seems to be fault in the transport of the paper in the rollers which can be bad or has some sticky substance .If you have used any adhesive sticker printing, ...
Question about Pixma iP2600 InkJet Photo Printer
when I hit print when the paper starts to feed the pushbar paper feed does so fast causing the paper to start slightly off caqusing a paper jam.. Is there anyway to adjust the feed When the paper does
Question about Pixma iP2600 Photo InkJet Printer
I cant get the paper to feed without jaming is ther a way to adjust the feed When the paper does not feed straight, dirty or sticky rollers can cause it to jamb or crinkle, also failure to remove all ...
...power off. The print head should now be positioned away from the pads. Lift the two pads out of the rubber holders with a pair of tweezers or long nose pliers and then rinse in running water (no ...
Question about PIXMA MX340 Wireless Office All-in-One InkJet Printer
...This is a fairly common problem on most printers after a while. The paper is pulled through by two 'rubber' rollers, which eventually become slippery and won't grip the paper. The answer is to wipe ...
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions