Questions & Answers for: Konica Minolta Magicolor rubber become sticky

...out the main (green handle) thingy. In the very bottom you will see a bar with a single large round rubber wheel in the middle, and white gears on both ends of the bar. Manually turn the right side ...

...out the main (green handle) thingy.In the very bottom you will see a bar with a single large round rubber wheel in the middle, and white gears on both ends of the bar.Manually turn the right side ...

...just open the door a few times and it will cycle your cartridges a few times, still problems ...rubber belts , rollers harden when set-up, ever seen an old rubber band? try streching it. I would ...

...become sticky. The sticky felt needs to be replaced. First clean area where felt was placed and use new one from hardware shop. It is sold as furniture pad. Part of this furniture pad has to be used ...

...media jam tray 1 I had a similar problem but not necessarily identical cause. Mine was due to the rubber rollers which grip the sheet of paper. I clean the rubber wheels with diluted alcohol 50/50 ...

How do you print Glossy Photos on a Samsung Color Laser CLX-3160FN printer without the laser buring off the gloss? Do you have the right type of paper? I suspect the glossy paper you have is for an ...

ive got the same problems ive cleaned the rollers, dismantled the machine and found no paper or dust ive even changed the paper size and reinstalled the drivers. is there anyone who can help with this

..."feet" so that they become "sticky" again. When I did this, the "Feet" or rubber semi-circle parts that rotate around a metal bar then started to correctly grab the paper again and the error

...the tape and glued in a piece of hard rubber of the same thickness. (Tape is only a temporary measure as it can compress or become sticky after a while.) Everything is back to normal now! Good

service call:14H on Konica Minolta magicolor Transfer separation Roller open the machine where the transfer belt is see a sponge looking roller on the other side ensure it is properly installed or ...