...rubber coating is removed it leaves you the greyish black plastic surface underneath. Now it is no longer sticky and does not get covered with dirt and dust. Also you no longer get a black residue on ...
...rubber belts that drive the tape spindle that makes the tape play! Over time these stretch and become loose and make the tapes play slowly and even shut down (replace belts and it should be fine) ...
...sticky one. #1. Original remote may have something spilled in it or may have dirty battery contacts. First check battery contacts and make sure it's not corroded. Clean with small brush and baking ...
rubber piece that pushes the arm to the arm rest. It becomes sticky with the years, and when this piece of gear goes back to the normal position, it takes the arm to the center with it. just clean the
Question about KV-MRD900 Car Video Player
My daughter put a sticky DVD in player and now it will not read dvd? What can I do? Remove it, clean the disc with rubbing alcohol and a cotton swab in a circular pattern, let it dry and then you'll ...
and capstans, play heads and runner rollers. The belt is likely stretched and sticky, replace it with a new belt. I use a product called rubber renue on the roller to stop it from sticking to the tape
Question about Cybercam GR-DVM90 Mini DV Digital Camcorder
Can't get rid of the safe mode. Error 04. Know matter what I do Are you already try changing tapes, if still try to hairdying the mecanism if you use the same tape after first try turn forward your ...
E03 eject and reinsert tape Hi Some black rubber part felt off from my camcorder. Now I have E03 error eject and reinsert the tape Can you tell me how or where should I put the small rubber part back?
Question about GR-D73E Mini DV Digital Camcorder
...sticky or the takeup rollers are icky take it apart . clean all the parts the tape touches with something thats strong but little water . as for the head very carefull clean it when you get to the ...
Question about GR-D73E Mini DV Digital Camcorder
rubber drive belt that pulls the tape through the VHS deck can become worn or loose. Open the deck and check the drive belt for any signs of wear or slack. If the belt is loose or damaged, it may need
Usually answered in minutes!
122 Questions
52 Questions
65 Questions
48 Questions
61 Questions