Questions & Answers for: roller vacuum cleaner turning

...roller. If you're Kirby vacuum cleaner has a belt indicator light, the roller will have a magnet built onto one end of it. It's very important to install to install a roller with a magnet on the same ...

...unusual noise; if you stop using roller vacuum operates normally When you set the roller back in place, you probably didn't get it set in the slots properly. May be raised up slightly on one side. ...

sure the roller brush is free of any debris. Use this link to access your vacuum to change belt or clean the roller brush. http://www.info-vacuum-cleaner.com/hoover-vacuum-cleaners.php Hope this helps

...vacuum brush roller out of the slots at the bottom of the vacuum base and remove the old belt from the brush roller and pulley rod. With the brush roller off of the unit, clean the brush by removing ...

...roller on Vacuum cleaner I have a electrolux nimble vacuum cleaner. A thin string wrapped around the roller, and it will not spin when I turn the vacuum cleaner on. I've removed the string, ...

vacuum roller won't spin My Bissell Healthy Home Vacuum brush roller won't spin. I can see the belt isn't moving when I turn it on to vacuum carpet. If the belt is broken, how do i

Have checked belt - removed strings from roller. Vacuum has suction, but the roller will not turn. try pushing the reset button..its a little red usually located on the right side of the nozzle cover.

...roller. Lie the vacuum down and turn it over to access the brush roller after turning it off and unplugging it from the wall. Check the roller for threads, hair or other debris wrapped around the ...

vacuum can't work like before First check and see if you have a switch that turns the brush roller on and off. If not, make sure the belt is tight and not stretched out. If that's not the problem turn

vacuum cleaner gives you the option to turn the roller brush on and off, be sure the button is on and the handle is pulled back. If you don’t have the option and roller brush is not turning, check the