Questions & Answers for: roller marks Vacuums

...from the ends of the roller.look at the belt and see if there are any burn marks on it.if its a eureka they tend to get loud just in few months Vaccum cliner getting louder. how can i fix

roller marks when vacuuming carpet. Roller does turn and filters are clean. Hi, When you turn the roller, you should feel some resistance from the belt. Remove the base blate that surrounds the beater

there is power but the motor seems to not turn, therefore, there is no movement via the rollers. please help The belt which turns the roller brush is probably worn and therefore not turning the roller

roller brush not rotating this may be the belt, and it may be the brush roller. I am leaning more towards the belt. The belt on any vac should be changed once a year, and for the pet lovers 2 times a ...

shakes or vibrates as I vacuum.Cannot find an obvious problem. Brush strips are not worn. The brush roller itself may be warped, or the bearings may be starting to wear out. Replacing the brush roller

roller end blocks need to be rotated. If you see several little hash marks on the side facing up, pull the bearing blocks out and rotate them until just one hash mark is showing and then put the brush

...roller, you will see one side that has several "hash" marks and the opposite side will only have one. When you take the cover off, if you see several hash marks, rotate the bearing block at both ends ...

...marks on the top of the block, it is in the new setting position and you need to rotate the block 180 degrees so that there is only one "hash" mark showing and then put the brush back on and put the ...

...roller marks, I use to do the whole house and not leave marks. Now I cannot do anything without leaving roller marks. check the small black plastic rollers in the head are rolling freely if not ...

Eureka airspeed rewind pet upright vacuum brush roller will not turn Probably the brush roller is clogged with pet hair and debris. Performance will improve markedly after all has been removed.