Questions & Answers for: Canon PIXMA roller marks

...marks on the page front and back (not near as bad on the back) . It is not always in the same place. I have done all the cleaning and deep cleaning. I have also done the nozzle check. I also cleaned ...

...the roller run clean over your paper, they will have picked up black ink dust and will leave black marks on the next paper you use. Questions? Use the comment box below to ask them. Regards, ...

...don't dry as quick. Also try feeding two or three blank sheets through the printer to clean the rollers and

...you 1: check in the printer properties( page setup ) is it latter then make it A4 2: clean the roller 3: also when u printting check with uper try not from try 2 if its printing proper then try ...

...error!!!! 6000 says the paper feed is not able to roll. Either something has fallen in to stop the rollers, or the encoder on the left hand side is too dirty to see the marks on the

roller with out breaking it. the paper wont feed into the printer , i sort of clean it alittle and it started to but quit' You need to remove covers or very gently your way squirt isopropel achohol on

what is error 6000 in a printer canon pixma 1800 6000 is a line feed error, either the platen roller is not turning or the sensor is dirty. Mostly I find something has fallen into the paper tray at ...

...This manifests itself by reporting a jam but there is no paper found in the paper path. A Page Pick roller failure, for example. Sometimes all you have to do is clean the rollers with denatured ...

gray platen roller. Also the gray roller could have scratch marks in the area where the object is jammed. Be careful not to push back the sensor lever that is on the right side behind the white guides

roller marks If you got roller mark on printed paper means roller is dirty. Some ink may be spilled on the roller. You can clean the roller with moistened clothe. Source: Printer Clinic