...marks on the right margin--I guess something got onto the, um, roller the paper goes around. But I can't see it and a) don't know how to look at it more thoroughly and 2) don't know what to use to ...
Question about HL 1440 Laser Printer
...back and forward but it has not helped. More than likely the grey streaks are from dirty fuser rollers open the fuser area and insect the fuser rollers i think they should be grey take silicone ...
...roller marks on right side of paper Printer is working fine other than what I would call a roller mark on the right side of the paper after ever print. Replaced the drum and new toner installed but ...
...your printer needs a new fuser assembly (If the teflon roller gets scratched or starts to disintegrate you will get lines or black marks on the page) or you need a replacement toner. Hope this
marks down the right side of my documents on every page. I have changed the toner but that does not help. Can I clean the drum? It may need general cleaning OR have toner stuck to the fuser roller. Be
...marks are there, if not there, just open the rear door and lookat the fuser roller, you may have to cycle power to see all of the roller, otherwise you unplug machine when paper is partway thru and ...
Although print is clear, paper is marked and smudged Your feed rollers are dirty.
...it needs to be right on the mark for the size you are using. After that you can clean the rubber roller above where the paper sits with a towel damp with alcohol. If it still doesn't feed you may ...
Poor print quality Has a grainy greyness on the page and a line across it. Only happened just recently. Changing the drum cartridge did not improve it. if cartridge and drum did not solved this ...
... Check that there are no marks or scratches on the drum or fuser roller. Whipe off marks on the drum with a soft cloth or if there are scratches, replace the whole cartridge unit. Best wishes, ...
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
249 Questions