Questions & Answers for: roll windows crank

...do you take off the window crank of my 1988 Cutlass Calais pull out on the crank as the window is rolled up, look all the way around the crank right behind where the crank meets the door. There ...

Ad

...roll it down half way and back up almost to the top, but then it seems to jump the track maybe? the crank just spins around and doesn't continue rolling the window. it's a 2002 grand am. thanks for ...

Ad

...roll up window until can get repaired Unless it has a handle (ie. it isn't a power window) you r going to have to tape up the window unless; you want to remove the door panel, and crank the tiny ...

car will not start, but will roll crank. Nothing car will not start, but will roll crank. Nothing in interior has power, locks,windows etc. Headl;ights will work. Have you ckeced all the fuses?

Question about 1989 Corvette

1 Answer

My driver side window crank handle rolls up and down just fine. When you get the window rolled all the way up the crank handle clicks and turns a few extra inches around. you need a new regulator, ...

windows slide down a bit, if it hads that just put a handle on it and try to roll it up some if it wont move there is a locking screw it is the screw closest to the front of the vehicle if the door is

Question about 2002 Rodeo

1 Answer

...roll it down its really easy sounds like it is off track, you will need to remove the door panel, screws in the arm rests, one on the crank or a snap ring, and possible one in the inner middle of the ...

windows only roll up 3/4 way car died no crank. put new battery in started but windows still only roll up 3/4 way. tried all reset methods nothing. help what do i try next Your window regulator is bad

Question about 2008 Sebring Convertible

1 Answer

2008 cobalt Chevy window will not roll up. The passenger side window will not roll up. All the other windows work. crank jammed or faulty --off track need to remove the door panel

Question about 2008 Sebring Convertible

1 Answer

...roll up. You have to remove the door panel to get to the window crank assembly. The window has fallen off the pin the roller is on or a carrier bolt has come loose and let the window drop. You can ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...