...line - appear only/ring/apprear and ring Hope this helps If you are familiar with system admin programming. Access admin programming terminals and sets Line access line assignment Can set to ...
into progrmming and reassign those 2 line to ring on your phone m7310 because those 2 line are not assigned to ring at your phone. Please let me know if you are having trouble getting into programming
...to ring. It is a Norstar Meridian M7310 You will have to go into system programming, under sets, line appearances. You will need to set the lines on the phones to appear and ring, not just
Question about Meridian M7310 Phone
line 3 ring tone with out success any other idea'/ s Feature * 6 is for the ring tone of the set, it doesn't change the cadence (ring tone) on a line... The only way to change the ring tone on a line.
Question about M7310 Corded Phone
M7310 phone line ringing does not appear on receptionist phone calls show on all other lines but the receptionist phone, and, it rings on the intercom button?? Feature **266344 Password 266344 ...
...line 001: appear & ring press the Chng key till it says appear only press next key (lower right arrow) The display should say line 002: appear & ring repeat the procedure the same as line 001 ...
...left side of phone until you see line assignment press list when you get to the new line press change until the line says appear only(no ring) or appear and ring(rings on the phone) press rls when ...
...ring on Mail line . Our phone is a Norstar M7310. Thanks Sherrie Enter Feature **2663444 Search through General Options until you find Ringing options. Type in the extension number of your personal ...
Question about Meridian M7310 Phone
...line to ring without it ringing to all the phones in the whole office Normally tech side programmingIf you do not know how to program, navigate or the password call a tech.otherwise go to ...
Question about M7310 Corded Phone
and its adjustments? Do you have the setting on "mute?" Is the line programmed to "Appear and Ring" or to "Appear Only" in system configuration? That is a setting for each line appearance for each set
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions