...Right Channel is working. I've switched the speakers to check what the problem may be but it looks like the amp speaker channels are not working apart from the front right channel. What could be the ...
Right front channel sometimes does not work I have some problems with my Onkyo TX-DS676 receiver, sometimes when I power it up my right front channel is not producing any sound. Work-arround solution ...
Question about TX-SV414Pro Receiver
...Right channel has no audio, left channel works fine. Strangely enough - I have had this amp for years in my bedroom - never play anything really loud on it... just CD's. I noticed this morning that ...
...right channel even when volume is adjusted higher on that channel to maximum. Have changed speaker wire and reattached several times. Speaker is not the problem. Try to tighten the screws at the back ...
...right channel other channels are working perpecfly aside for the right channel when the volume increase the sound quality becomes distorted. There is a problem in the pre-amp section of the receiver. ...
...is working. Please advise. Recommend changing your FINAL drive AMP IC most house BOTH right and left channels, your drivers right channel input is good cuz it is used to make the left channel ...
...right channel speaker sound Onkyo TX-DS696. I have no right channel speaker sound. Could it be a fuse blown and I can do a DIY fix hello there 2 transistor 1 for the right channel and 1 for the left ...
...right channel is getting induction or something making noise and the music sounds horrible.I have swapped the cables and both speakers sound great on the left side. Swap input cables to the left side ...
Question about M-501 Amplifier
...right channel sounds fine the left channels meter is lit up and not moving.The right meter is operating just fine Hi Wayne, the unit would have to be taken to an authorized service center for repair. ...
Question about Rc-251s Tx-sv303 Tx-sv313 Tx-sv313pro Rc251s Txsv303 Txsv313 Txsv313pro
color coding is RED is right audio channel and White is Left audio channel. Just make sure that whichever color (black/grey) you use the same color end is right channel on both or left channel on both
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
135 Questions
85 Questions