Questions & Answers for: Panasonic right channel

channel. There is an option in your camera to split into two channels - enable it, or split into two channels in post. To record left and right from the DVX using XLR cables, you'll need one for left,

...right hand side of machine as you look at it from the front). Use your remote to change the channel to A2 with the rocker button just above the video+ button on the controller. This will then record ...

...Max!! I believe you have cable box right? Most of the cases if you are getting audio except channel 11,it could be a cable box problem.you can swap the box to another tv and check.. Good luck ...

...channel it'll read no signal and you can't do anything. So make sure you have cable hooked up right and make sure it's on the right source or video channel first. I don't know but this might

...switched back and forward to the Converter Box, autotuned many times, but no sign whatsoever of Channel 7. I can't receive channels 3 and 6 right across the Delaware in Philly. Welcome to the

...right now is that the tv keeps making the channel flicker noise as if I'm clicking the channel. But I'm not touching the controller at all. How does this reset? I unplugged the television from the ...

Right now it will only record the same channel that the TV is on and I have to tell the VCR to record channel 3. How can I get the VCR to record multiple shows on different channels with the cable box

...channel will be saved when no operation is performed for 60 seconds and the "Manual program" menu will also exit automatically. If you perform scanning more than twice, previously saved channels are ...

right spots with the wires. Check your channel scan status, try it on anntena and try it on cable, run channel scan on both. good luck. Try vcr wires if cable wires dont work. vcr wires are yellow red

...right channels not working Check your cables and then move the channel selector through all settings a couple of times. This will give some indication of the real problem. If the channel comes back ...