Questions & Answers for: LG right channel

...channel scan for digital channels? See www.dtvanswers.com or http://dtv.gov/iguide.htm for more information. Have to have brodcast in HD to recieve HD/the program have the HD bold logo side lelft or ...

...right, but i can't get it to switch over so that it would be seen on the TV. can you help If a cable box is not required for cable signal reception, connect the cable line to the ANT. IN connector on ...

...right-channel PC speaker into the mini-plug jack on the Y adapter. Step 3:Connect the mini-plug on the audio cable attached to the left-channel PC speaker to the mini-plug jack on the back of the ...

My LG dr389 cannot record the DSTV channels, it shows copy right protected i got a dr 389 lg and it wont find any tv channels at all but it still comes up on my tv

channel 41. When this happens it turns itself off but comes right back on, then off again. When this happens the remote will not do anything. To get the set going again I have to unplug it, disconnect

...channel available when connect a cable right now. Hello: It sounds like you need to do a "channel scan". For the LG 26LX1D, you can follow these directions: Press the "MENU" button on your remote Use ...

...right channel), White (audio left channel) then you will use the AV1 or AV2. If you use component video Red (Video red signal), Green (Video green signal + sync), Blue (blue video signal), Red (Right ...

...channel the TV needs to be on changes. Cycle through your available inputs by using the Input or Video Source button on your remote. Check each one for audio/video. Once you are on the right input, ...

skipping channels SKIPPING CHANNELS You have a bad micro processor on the main PCB. Remove back cover, board on right side, find part# on board and replace. Shop Jimmy is a good source for TV parts.

...right model in. I was watching the tv and went to change the channel, when I noticed that the box with the channel number looked differ There are no error codes that pop up. When the channel box pops ...