...reverse button was slack and had no resistance. But after inspecting every moving part, I realized it was just stuck from many years of non-use. I finally got it free today! I had used some Tri-Flow ...
...should pop out. I have re-oiled profusely the reverse button on my Riccar 9900. It now is able to be depressed and is not stuck. However, my machine still is stuck in a reverse feeding
...reverse button is stuck. What can I do? Thanks! Sounds like the feeding unit is stuck rather than the button. The reverse button engages the feeding unit. Suggest that it be serviced by an authorized ...
...reverse button located in the center of the stitch length dial. It is firmly jammed in the reverse position causing the machine to sew ONLY in reverse. When I pull firmly on the button it will sew ...
...reverse button to sew in reverse release the reverse button to sew forward The reverse button seems to be stuck. Be sure you are in the correct stitch pattern...if you are on a buttonhole stitch or a ...
Question about 15218 Mechanical Sewing Machine
reverse button has no tension and the machine is stuck in reverse stitch mode. Can this be repaired? You may want to take it for service. Could be the machine has seized with the reverse button stuck.
Question about 15218 Mechanical Sewing Machine
...reverse button is stuck. Try this before going to a professional. Unplug your power coed. 1) Place the stitch width to it's widest. 2) Remove the top cover. 3) Spray a little penetrating oil (wd40) ...
Question about 15218 Mechanical Sewing Machine
Stitch selector knob and the reverse button are stuck but it will sew in reverse. The old oil has dried and caused it to seize. Wheel on right side that controls the needle up and down is very tight..
Question about 15218 Mechanical Sewing Machine
www.google.com/search?q=Quantum+9960BR+stuck+in+reverse Page 10, Button 8 may be stuck. https://manuals.singer.com/Manuals/RetrievePDF/891 Open the manual, press CTRL+F, type 'reverse', press enter. .
...reverse button may be stuck in the reverse position. - Press and release the button to see if it releases and allows the machine to sew in the forward direction. 3. Check that you have selected the ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions