Questions & Answers for: Homelite rev 1 15

do not have basic setting for 2 speed jet so engine revs up and down instead of constant speed. >>The Following is the Instruction File for Setting the Air Mixture Screws. Any Input is ...

>>****Turn the Idle Air (L) and Main Air (H) Mixture Screws In Until SNUG **Do Not Jam** Then Reverse Both Screws 1 1/2 Turns. Set the Throttle Full Open, Start the Engine. >>Turn the Main

>>****Turn the Idle Air (L) and Main Air (H) Mixture Screws In Until SNUG **Do Not Jam** Then Reverse Both Screws 1 1/2 Turns. Set the Throttle Full Open, Start the Engine. >>Turn the Main

homelite leaf blover run with choke soon when chokeis off ,cant rev up and die My redmax eb7001 starts fine but it dies when I try to rev it up? I let my neighbor borrow it over the weekend and it ...

...it in which clockwise till it runs smooth then back out slightly till it just starts to miss then rev up the throttle and adjust the high side which is towards the filter turn the mixture screw in ...

33cc 14 inch homelite chainsaw, wont rev up to high speed, will start and idle fine, but when you try to rev it up it just dies. I have changed the plug, cleaned the muffler, changed the fuel, rebuilt

spear&jackson chainsaw exhaustblocked would this not run at full rev's spear&jackson chainsaw exhaustblocked would this not run at full rev's IF THE MUFFLER IS BLOCKED, OR THE ...

blower will not rev at high speed blower starts and idles but won't rev at high speed What kind of blower is it? Make model and serial

homelite 42cc model ut10580 high low jet set settings?how to ajust try 1 1/2 turns from shut then adjust to get highest revs and richen it a bit till rpm slow. too rich is highest revs. and will burn ...

Homelite super 2 chainsaw runs fine for first 15 minutes and cuts well in big wood but after first 15 minutes dies wont hardly even start again unless fillup with gas and same thing in 15 minutes fuel