Rear Panel Can the rear panel that rises above the cooking surface be removed from this stove to allow it to be used in an island with a retractable vent system. Brian [email protected] generally ...
Question about KHTU165RSS Stainless Steel Kitchen Hood
Kitchenaid downdraft retractable vent My retractable vent just stopped working. I did not replace or adjust the vents. I used it one day successfully and the next time that I pressed the button for it
Downdraft vent won't stay down. Push the button and it retracts normally, then pops right back up? check your bottom limit switch - i'm guessing its bad. the unit doesn't stop operating til it trips a
Question about KIRD861HSS Kitchen Hood
Kitchen Aid downdraft hood stuck in retracted position I have a Kitchen Aid KIRD861XSS downdraft hood. The filters and switches have become dislodged in the retracted position. How do you raise the ...
Vent doesn't rise After removing the filters for cleaning, the vent was accidentally retracted and doesn't rise anymore. Found a manual online, and it has a note saying this could happen, but gives no
retractable vent stuck I removed the filter for the retractable vent for cleaning and pushed the vent down without putting the filter in. Now the vent is stuck and I am unable to raise it since the ...
OVEN DOOR LATCH BLOCKS THE OVEN DOOR FROM CLOSING ALL THE WAY. I CANNOT GET THE DOOR LATCH TO RETRACT. Hi There could be couple things. First, try pushing the door closed as you turn the handle. The ...
Question about KSM50PR Professional Series Stand Mixer
...t get it off. There is a sort of a button on the mixer rod itself that looks like it is supposed to retract and it doesn't. Can you help? The button does not retract, a bit of CRC may help ...
Why does ice maker keep making ice? when ice bucket is full, so when you open the freezer door, ice falls on floor Even the Ice Maker switch is in the OFF position The level sensor is jammed or not ...
Question about (KSRD22FKST) Side by Side Refrigerator
KitchenAid Retractable Exhaust Fan problem when rising. When button is pushed, unit rises up about an inch. Requires 10 or more presses to extend fully. Otherwise fan and retraction is normal. Unit ...
Usually answered in minutes!
269 Questions
192 Questions
105 Questions
116 Questions
75 Questions