Questions & Answers for: resistance motorcycle clutch

...resistance on clutch lever (2000 Millie RSV) Bike has been sitting over winter and now I've gone to use it there is no resistance from the clutch lever. Any tips?? check the slave cylinder then bleed ...

clutch lever has no resistance & seems not to do anything. Engine cuts out when put in gear. (sidestand up!) does it have a cable clutch or hydralic clutchyou need a clutch or slave cyclinder.

...clutch in there is no resistance it just freely moves in and out like it is disconnected bt it is even in the case there is just no resistance what can i do The clutch cable sounds like it's ...

...clutch, loosen the lock nut. Now turn the adjuster inwards JUST UNTIL YOU FEEL A RESISTANCE. DO NOT FORCE THE SCREW. If you need to, back the screw out and then go back inward until you feel the ...

would explain why you don't feel the resistance. If your clutch is cable acutated, there is no explainable reason why you wouldn't feel the resistance of the clutch springs when you squeeze it

no resistance on clutch lever Adjust the clutch then. The clutch plates and the clutch cable both wear during use If you have a hydraulic clutch you will need to check the clutch fluid reservoir.

clutch lever in and see if there is any resistance. If it has little or no resistance at the lever, it has air in the line(if hydraulic) or the clutch cable needs adjustment. The clutches are probably

...has an hydraulic clutch and I don't see anywhere to make an adjustment Make sure you've bled all of the air out of the clutch assembly. You should feel positive resistance when the clutch is

2011 TM 85: Clutch isn't even functioning. You can pull it in while riding and it doesn't make a difference. But has the resistance like a normal clutch????? check for a broken or jammed clutch cable

...a clutch cable when I pull the clutch lever there is no resistance hydraulic and no resistance to the lever indicates a failed slave cylinder, master cylinder , or empty reservoir or air in the ...