Questions & Answers for: reset switch whirlpool tub motor

Question about 2 Person Corner Air Tub By Vitabath Bathtubs

1 Answer

...reset switch on the motor.also attached to the power buuton is ablack thin hose if this hose came off the switch or motor than the motor wont come on.Look around for an access door .If thier is ...

Ad

Question about 2 Person Corner Air Tub By Vitabath Bathtubs

1 Answer

...off. I had to turn off electric panel. Anyone know what might have happened. The switch go bad? Kohler Whirlpool tub turns on and shuts right off. Reset gfi and motor turns on and shuts right off. ...

Ad

Question about EH85-959 Real Whirlpool Bath 6 -White

1 Answer

...reset switch on the plug it is plugged into, or there may be a switch somewhere else in your bathroom that has the reset switch on it. You can buy a tester for about $3 or $4 that plugs into your ...

Question about 5' Jacuzzi Tub Bathtub Cetra 532 H525-969

2 Answers

...not powering, motor comes on when manually reset at outlet. How do we fix button? that is the sounds of a bad air button on the side of the tub. Check to see if the tube on the pump switch is ...

Question about 1209-LA-0 Hourglass Whirlpool with Integral Apron, Flange and Left-H

1 Answer

...reset button or serial number. Where are these items? will have to remove access panel or make one the motor /pump assembly is mounted to the tub test for power to the switch and pump the numbers u ...

Question about Calla 6042 Bathtub - 101058-000

2 Answers

...puts air pressure from the push button to the electric motor switch. It was pulled off on my Maax tub . Just push the hose back on both ends. Push button on upper end and motor switch on pump

Question about Calla 6042 Bathtub - 101058-000

1 Answer

...switch that turns on tub and it was replaced now the pump will not turn on. I hear the switch kicking on near motor when I depress the air switch but pump does not turn on have you tried reseting the ...

Question about Calla 6042 Bathtub - 101058-000

1 Answer

...reset (newer GFCIs have an interlock feature that prevents them from resetting if they don't like the flavor of the incoming power) and there is still no power to the pump (use a plug tester, or plug ...

Question about 1375-RM-0 Revival 6' Bath Whirlpool with Massage Experience and Righ

1 Answer

switch to turn the motor on, NOTHING happens.\r\nThe outlet is ok, the circuit breaker is set properly, but it does not turn on. Any suggestions I can afford ??? If all the circuitry and the outlet is

...switch will not get an air blast to operate it. My motor reset is also a bear (noticed the location when I put the tub in) so I can assure you there is one. I have had excellent experiences with ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Home Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66835 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...