Questions & Answers for: reset passlock 2000 10 truck

...it that way for 10 minutes. After 10 minutes turn the key and take it out. Repeat this process (2) more times (3 times, 30 minutes total) This should reset the passlock system to recognize your

...it that way for 10 minutes. After 10 minutes turn the key and take it out. Repeat this process (2) more times (3 times, 30 minutes total) This should reset the passlock system to recognize your

...it that way for 10 minutes. After 10 minutes turn the key and take it out. Repeat this process (2) more times (3 times, 30 minutes total) This should reset the passlock system to recognize your

reset the passlock using the 10 minute reset several times but, this has done nothing for me. I'm about to check the resistance at the ignition switch. How else can I bypass the passlock system to get

...reset by turning to on and waiting 10 minutes. This worked but we are wondering if there is a way to bypass or disable the passlock system to avoid it happening again? Thanks there is a way to bypass ...

10 minutes. 3x10 = 30 minutes. The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch turn from OFF to CRANK Important: Turn the Ignition Switch

reset the passlock system? Your Passlock may need to relearn the ignition keys, if the ignition lock has gone bad like my in-laws Grand Am Gt, here is what i did so they will not get stranded any more

...passlock assembly and ignition tumbler may need replaced. PASSKEY LOCKOUT RESET ALL GM CARS 1999 AND UP 1) Put the key in the ignition and turn to the "ON" position. Leave it that way for 10 minutes. ...

...passlock and ignition tumbler may need replaced. PASSKEY LOCKOUT RESET ALL GM CARS 1999 AND UP 1) Put the key in the ignition and turn to the "ON" position. Leave it that way for 10 minutes. After 10 ...

...reset If you are referring to the Passlock immobilizer, here is the relearn process. PASSLOCK 10 MINUTE RELEARN AUTO LEARN Time required, approximately 10 minutes: 1. Insure that the battery is fully ...