...Mx310 unable to scan YOu may want to reset the printer and try to scan again. If this is not succesful you have to make sure your printer have the correct driver with the correct OS. You may want to ...
MX310. took out both cartridges, and for 10 seconds I held the Reset. put the cartridges back in, closed the lid, and again, for another 10 seconds held the reset. SLOW seconds. this reset, ink levels
Question about PIXMA MX310 All-In-One Printer
...mx310, the paper feeder in the back isnt ligned up to feed regular paper, it is stuck to the envelope side, how can I reset it to its original position? Thank you Sal There is some kind of mechanical ...
Question about PIXMA MX310 All-In-One Printer
...MX310 that will not allow me to print. Can you help please? There are several things to check 1.remove and reinstall the ink cartidges 2. press ON/OFF switch to reset the printer 3. if the printer is ...
Reset Canon MX310 I followed the procedure to reset the cartridges of the Canon MX310, but without success. The light with the symbol of lightning continues to flash and remains the U051 code in the ...
MX310 I was using refilled Ink cartriges for the past year I replaced with the same source of refilled cartrige befor with no problem now I have an Alarm light with message "check ink U150 blk" how do
...the front door to get into the maintenance mode..and after that look for memory reset .. Another way to reset a canon printer is as follows : ...
Question about MX310 Office All-In-One Printer
...MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds. Push the "Power" button while holding "Stop/Reset." Hold down ...
MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds. 2 Push the "Power" button while holding "Stop/Reset." Hold down
Question about PIXMA MX310 All-In-One Printer
MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds. 2 Push the "Power" button while holding "Stop/Reset." Hold down
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions