Questions & Answers for: reset lamp hours toshiba

reset the lamp and it might work for another 500hours. If the picture is still pretty bright I can get you the reset procedure, but be warn that when the lamp does eventually blow it could shatter the

...reset the lamp hours? Could this be the problem? yes resetting the lamp hour might be the issue but not necessarily. It could also be a temperature issue as the fan (s) might have stopped or a temp ...

...670 Please help with resetting lamp. bulb has been replaced and after about 4 minutes it turns off. Need to know how to reset the hours back to zero. How to reset Toshiba Projector Lamp MODEL ...

reset lamp. replaced lamp and installed new lamp. need to reset lamp Installed new lamp and need to reset lamp Press RESET, <, >, ENTER keys on remote within 5 seconds to reset lamp timer. hi go

...reset lamp hours for a toshiba TLP-T721 I have not actually tried this but on a different post, here's the wild solution: Reset the lamp counter hours of operation for the projector TOSHIBA ...

reset lamp timer on Toshiba TDP-T45 Reset the LAMP COUNTER HOURS: 1. Turn off the projector and unplug the power cord. 2. Press and hold down the three buttons at a time (ON/STANDBY) (MENU) and (INPUT

...Reset the lamp hour and try again. It is recommended that reset lamp hour only after replacing the lamp. No matter, just reset the lamp hour. If problem doen't repeat the try to replace lamp. Another ...

...reset the lamp hour of Toshiba TLP791, do the following. 1. Turn-off the device by pressing the "ON/STANDBY" and unplug the power cord. 2. In the meantime, hold down buttons "ON/STANDBY", "MENU" and ...

...reset the lamp timer to '0' hours when I replace the bulb? When I replace the lamp in my Toshiba T90 it still shows the number of hours the projector has been 'on'. Now that I have a new lamp I want ...

...reset the lamp hour counter on a Toshiba TDP SB20 or a Smart TDP SB20 how do i reset the lamp hour counter on a Toshiba TDP SB20 or as it also known as a Smart TDP SB20 Make the beep or tone function ...