Questions & Answers for: Chevrolet TrailBlazer reset engine light

Question about 2004 TrailBlazer

2 Answers

...engine soon? hi, this is just a reset issue. sometimes the CPU can become confused. the original warning that informed you about your gas cap is still in the cpu's memory. you will have to reset the ...

Ad

reset 2003 trailblazer service engine light reset 2003 trailblazer service engine light is this the check engine yellow light?

Ad

...reset the check engine on a 208 chevy how to reset the check engine on a 2008 chevy trailblazer Just disconnect the battery (negative terminal) and turn the headlight switch on for about 15 minutes. ...

Question about 2007 TrailBlazer SS

2 Answers

engine oil, the system must be reset as follows: Turn the ignition to RUN, with the engine OFF. Press the information and reset buttons on the Driver Information Center (DIC) at the same time to enter

...reset the change oil light, do the following: Turn the ignition key to run with the engine off. Fully press and release the accelerator pedal slowly three times within five seconds. If the CHANGE ENG ...

reset the check engine light but without fixing the problem, it will come right back. Usually the car runs in a lower power system when the light is on. You may or may not notice that. I would suggest

Question about 2003 TrailBlazer

1 Answer

...engine light comes on reset it it and takes a couple o days to come back on .truck doesnt overheat but comes up 128 error is it the thermostat or engine coolant sensor It is possible that your oxygen ...

Question about 2004 TrailBlazer

1 Answer

...engine oil light will not go off To reset the change oil reminder light, do the following;1) turn key to RUN position, but do not start engine,2) press accelerator pedal to the floor three times and ...

reset check engine light on 2008 Chevrolet trailblazer Check engine light came on after bumpy ride on frozen lake, can I reset by turning key and pushing down on one of the pedals No, the check engine

...engine it only had 2400 miles on it.I learned how to reset light and it worked the first start second start same problem,why? its possible the PCM has picked up an intermittent reading and set the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...