...reset to factory defaults, turn on (with no disc inside), DO NOT OPEN THE DISC TRAY, just press the stop button on the player for 5 seconds. Have you put new batteries in the remote? It sounds as ...
...reset dvd recorder to ntsc from pal I moved my cyberhome dvd recorder/player and when I began to reset it - I inadverdently pressed the pal button on the setup for our region - now I cannot reset it ...
...Reset you player by doing the following: With the player on, hooked properly to your television, and on the correct station: Open the tray Close the tray (with no DVD inserted) Hold the stop button ...
Need code I have the zenith universal remote whats the code for the cyberhome dvd player no display my player.i need this player reset code or remote code. i need code for change zone
CYBERHOME DVD PLAYER WON'T WORK I HIT A BUTTON ON THE REMOTE BY MISTAKE, I BELIEVE IT WAS THE PROGRESSIVE SCAN BUTTON AND NOW MY DVD PLAYER WON'T WORK. IS THERE A CODE I CAN USE OR A WAY TO FIX THIS ...
Reset Cyberhome CH-DVD 300 Can i reset Cyberhome CH-DVD 300 Plaer Dear friend, Press and hold STOP button on front panel of the player more than 5 sec. The player reset after 5 sec.
how to reset cyberhome ch-dvd 300 password press and hold the stop button on the front panel on ur dvd player ur player will be resetting
Cyberhome ch-dvd 300 and since then its not even sending either audio or video to my tv. Tried to reset, but couldn't figure out how to. Please help me how to reset it to normal viewing. Thanks Rajeev
cyberhome ch-dvd 300 player willnot come out of standby and willnot reset after holding reset for 30 sec Possible failure of the processor. You can shut down, power off the unit completely. Allow time
t open tried reset slot to open and the goor opemed buttray wants to stay like it is in bind I have a yellow light .on the front, and the disc tray won't open. I have a cyberhome DVD player,CH-DVD 300
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
