...Alarm - Press Lap-Reset Button in normal time display mode to silence alarm. Hope this is helpful, George. I have a similar solution and I found the instructions fir the Extech Model 365510 digital ...
...and the alarm time should be displayed. While holding the "D"/reset button down, press the start or "C" button to toggle the alarm on or off. Hope this helps Thanks for this!!!! You're a big
Question about Sea-Pathfinder SPF40-T Wrist Watch
...reset button will show the alarm time again, but it will hold there. While holding this lap/reset button, press the start/stop button (labeled). This will turn on (or off) the alarm (tiny ...
Question about Sea-Pathfinder SPF40-T Wrist Watch
...reset button will show the alarm time again, but it will hold there. While holding this lap/reset button, press the start/stop button (labeled). This will turn on (or off) the alarm (tiny indicator). ...
...Reset button is pressed, the Alarm LED and COPY button light alternately, Alarm in orange and COPY in green, starting with Alarm LED.) "CANON Idle" is displayed on the LCD. 4) When the COPY button ...
...reset alarm? 1. Press the Alarm Set button to display the current alarm. 2. Hold down the Alarm Set button for a few seconds. This will cause the time to flash. 3. Press the Up/Down buttons to reset ...
...Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED 4) When the Power LED lights in green (and "ServiceMode Idle" is ...
...will flash press START to set alarm hour. Press again RESET button Alarm MINUTE will flash press START to change. After done press MODE to bring back normal position. SO YOUR TIME & ALARM GET
Question about Unlisted Ana-Digi watch
...Alarm Reset, Time Reset. In the Normal Time Mode, the Day of Week, the Hour, Minute and Second are displayed (none flash). If the Alarm and Hourly Chime icons are not displayed, the Alarm and Hourly ...
...the alarm. The ALARM indicator light will turn on when the alarm is active. 8. To turn off the alarm, press the SET/RESET button. The ALARM indicator light will turn off when the alarm is
Usually answered in minutes!
756 Questions
260 Questions
271 Questions
253 Questions
254 Questions
