Questions & Answers for: Philips reservoir

...found in ours that the little float was stuck over the sensor (the little patch) down in the reservoir. The float could not rise with the water, thus, the machine did not know that there was ...

...FLOAT HAS COME OFF. WHERE AND HOW DOES IT GO BACK ON The float goes into the bottom of the reservoir. If you look in, you'll see a little slot on the side down at the bottom. The float goes ...

...your Jet Clean System used to work, but now rejects the razor and flashes a red indicator that your reservoir is empty when it is not? The reason is that the liquid level sensor is full of gunk (you ...

My Philips 60PP93 5217 TV has a very murky and foggy picture, plus the tints of the colors are off. Adjusting picture doesn't help really, ideas? You have the very common issue of like an algae ...

...You probably didn't rinse the machine before first use. It's recommended you: fill the reservoir to the max,put a large bowl underneath the outlet,press and hold the single- and double ...

...continues to flash all the time.tried the magnet fine hi , i had the same problem,i cleaned the reservoir and still didnt work, what i did to resolve it was to get an old magnet and run it up and ...

...litre of water in a measuring jug. Stir until the powder is completely dissolved. 2 Fill the water reservoir up to the MAX indication with the descaler mixture. Then put the water reservoir back

the razor in it or what???? 1 Set the Jet Clean System base on a flat surface and pull the cleaning reservoir out of the base. 2 Unscrew the fill cap on the reservoir, pour Jet Clean Solution into the

...you can often fix is yourself. Just follow these steps. Clean the vent There is a small vent in the reservoir door opening to let air in as water is drawn out of the reservoir for every burst. If the ...