Questions & Answers for: replacing o2 sensor

Question about 1999 Cougar

1 Answer

...o2 sensor heater circuit malfunction Bank 1 Sensor 1 (P0141) o2 sensor heater circuit malfunction Bank 1 Sensor 2 (P0155) o2 sensor heater circuit malfunction Bank 2 Sensor 1 (P0161) o2 sensor heater ...

Ad

Question about 2003 F150 Regular Cab

1 Answer

spark plug. Auto Zone has O2 sensor and they can give you the step by step instructions to replacing the O2 sensor with common tools and if you need a O2 socket, they can give you one as a loner. 

Ad

Question about 1996 Neon

2 Answers

replacing the O2 sensor in about 30 min. Once you located the O2 sensor, disconnect the wire harness and use the O2 sensor socket to remove the sensor from the exhaust. It's like removing a spark plug

Question about 2004 Silverado 2500HD

1 Answer

...replacing a Spark plug and you can pick up the O2 sensor at any large Auto Parts store with a can of WD 40. Just unclip the wire leads to the O2 sensor and then with a O2 sensor socket or hint close ...

Question about 1998 Explorer

3 Answers

...O2 Sensor is malfunctioning. This will be the O2 Sensor located on the Catalytic Converter. However you should check and/or replace both sensors if needed. 3. You have an Exhaust Leak. In Order of ...

Question about 1998 Explorer

5 Answers

...replacing that particular O2 fixes the issue. A worn out O2 sensor that will need to be troubleshot and replaced by a qualified shop. why 2001 pajero io neutral light blinks while the vehicle is ...

Question about 1998 Explorer

1 Answer

...O2 sensor and transmisson was rebuilt . trans was done first and then code 300 came up. replaced O2 senser and the vehicle is running fine. also plugs were replaced. any answers? Jeep code 1129: ...

...O2 Sensor (Lambda probe) fuse popped (replaced popped again)-bad O2 sensor? Recently had the fuel pump replaced. Check engine light came on codes say O2 sensor probe and fuel pump problems. Fuel pump ...

Question about 2004 Pacifica

1 Answer

replacing an O2 Sensor, the PCM RAM memory must be cleared, either by disconnecting the PCM C-1 connector or momentarily disconnecting the Battery negative terminal. The NGC learns the characteristics

...o2 sensor before the cat converter, now code says bank one( before cat.) needs replacing. are there 4? before inspection, replaced front 02 sensor, right before the cat. the sensor before the cat is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...