Questions & Answers for: Jeep Liberty replacing keys

Jeep liberty 2002.....ignition key lock Problem : Jeep liberty 2002..... Ignition Key will not turn, Possible solution: Ignition lock replacement. Question: Are there any recalls regarding this ...

key won't turn try grabbing the steering wheel and turning it while you are turning key If it worked before the last few times it may have turned easily or may have been sticking somewhat. It will not

My remote key entry won't lock the Jeep. I My remote key entry won't lock the Jeep. I replaced the battery but no luck. I have to use the key in the door to gain entry but the alarm goes off. when you

I have an 08 Jeep Liberty that has a remote starter on the key. I tried to unlock the car with the remote, however, that didn't work, so I unlocked the car with the key. The alarm went off, I tried ...

(Ignition) Key won't turn. Happened about a year ago and locksmith WD40'd it, worked fine til about a month ago, key got stuck, I did same (WD40) now the WD40 isn't working and the key won't turn (I ...

no spare and lost keys how do i replace them cost go to jeep dealer and you can get replacement keys and have then programmed to you car. As to the cost then it will not be cheap.

...which the key switch went out in it,so i first decided to replace the steering wheel column. after replacing the steering wheel column it still will not start, so i then decided to replace the key ...

doors will not open by using remote key pad the remote key pad doesn't open the locked doors there is a clicking sound under the dash when unlock key is pressed. both RKE keys dead.? car came with 2 ,

2003 jeep liberty will not crank with key in start position I have replaced ignition switch and the actuator is not broken but engine will not crank when key turned to start position, all fuses and ...

...in housing. Ignition switch actuator pin? Check to see that the cylinders are exactly the same. Try replacing and removing the original. a/t or m/t trans, auto or stick? read chapter 19 yet, at what ...