Questions & Answers for: replacing fuses frigidaire affinity dryer

...frigidaire dryer it is mounted on the upper right hand corner of the rear bulkhead. just called frigiare about fuse,s they said there are no fuses they are referring to your circuit breakers for your ...

...frigidaire dryer -no heat or staying on--electric model leq7000eg0 had a code that I analyzed after machine got a code e48-so i replaced circuit board after many resettings. now machine seems to work ...

...Frigidaire Affinity dryer stopped working after less than 2 years. No lights, nothing. I checked our fuse box and everything is fine. Is there a fuse in the dryer that needs to be replaced or reset? ...

...fuses in a frigidaire affinity dryer Hi, On many dryers, there's a thermal fuse mounted to the exhaust duct inside the back cover panel. The fuse--which is about an inch long--is usually embedded in ...

...limiter still no heat on an affinity 7000eg series dryter check the element,then the thermal fuse on the dryer vent housing by the exhaust outlet on the rear or on the blower housing on the ...

Frigidaire Affinity Dryer won't heat up element good just replaced the thermistor and also the fuse only thing left to replace is the Thermal High Limit... but tested that and it was good any t My

...Frigidaire Affinity AEQ6700FSO electric dryer, once we turned on the dryer to run a cycle, it didn't heat at all. The dryer ran for about 10 minutes then stopped running, but the display was ...

Frigidaire Affinity panel turns on (lights up), even counting down, but the dryer won't tumble or heat. Help?! No humming, no sound either. Hi margaretc920 - Often when a dryer turns but will ...

frigidaire affinity dryer. I switched the cord from the 4 prong to the three prong wire and now the light will come on in the drum but the control panel will not turn on or let me do anything with it.

frigidaire affinity dryer. We've replaced the heating element and the fuse. It's still happening. It's been thoroughly cleaned out. What is my next step? This indicates it is the High Limit Thermostat