Questions & Answers for: Chevrolet Astro replacing ecm

VAN WONT START WHEN COLD/WET WEATHER VAN WONT START. ELECTRIC FUEL PUMP TURNS ON BUT SOUNDS LIKE NOT GETTING GAS. CAP AND ROTOR REPLACED SINCE TOLD MOISTURE IN IT. TRIED STARTING QUITE A BIT AND ...

need help with this 93 astro van 93 astro wont start has 4.3l tbi engine replaced fuel pump,relay,spyder tbi injection unit i have fuel to injectors power at injectors both injectors test fine at ...

astro 2000 electrical problem. liter and all other 12 volt adepters do not work replace fuse and it blows. i had tried to jump start the battery and crossed the wires after that i had this problem i ...

we replaced the fuel pump on our 94 chevy and ran fine for a day we replaced the fuel pump on our 94 chevy astro and ran fine for a day now won't start what could be problem ecm fuse is probly blown ...

astro van won't start, did all you could think of and still nothing replace the ECM. if all else is testing fine,then the ECM is bad. this is commonly called a "brainbox",and they do go bad,sometimes ...

1992 CHEVROLET ASTRO VAN ECM FUSE KEEPS BLOWING. PULLED VAN IN GARAGE REPLACED SERP BELT IDLER PULLEY AND TENSIONER ASSEMBLY WENT TO PULL VAN OUT TURNED KEY AND ECM FUSE BLEW AS SOON AS I REPLACED THE

1998 Chevy Astro. Will not decelerate quickly. It stay at the same speed when my foot is removed from the pedal. Some times it will slowly continue to accelerate. Help please. Faulty throttle position

ecm fuse location 2001 chevy astro van I took my van to auto parts store because of the service engine light came on. They went to plug up there device on the computer to the van and said that the ...

...ecm before replacing it. If you have a ford eec diagnostic try to get the codes. If you don't have a eec code reader there is a way to get the codes out by counting dashboard blinks. If you can get ...

...ECM-B fuse and relay. After replacing the fuel pump, the van still would not start. Then I found that the ECM-I fuse had blown. The van ran OK for a couple of days, but I blew two ECM-I fuses today ...