Questions & Answers for: replacement cord euro pro iron

...cord replacement model 4750 I need to replace the power cord on my iron. Where are the screws to start taking it apart? Can you please provide direction for disassembly six screws on bottom plate two ...

the cord has to be replaced . the model i have has a detachable iron. so all i need is a new cord with the connector. try hard ware store thumbs up

cord of the iron ? Remove the back plate where the cord attaches to the iron... there are 4 screws visible and another 2 screws hidden under the two rubber feet...These are joined together by a rubber

cord holder Model EP49. I need a replacement cover and after calling the 800 number listed am told it is no longer in service. Where can I get a replacement cover? This is for Euro-Pro Model # EP49. I

No power from cord. I want to replace the cord. In replacing the cord, you have to remove the screw that holds the back cover and unscrew the damaged cord from the heater terminal. Insert the new cord

...cord conecting to iron got a little burn on my arm The cord has an internal break and it made contact and burned through the insulation, your arm happened to be in the wrong place at the wrong time. ...

cord. Just buy similar to hardware store and put it to your iron. It's simple to replace and you have to have a analog tester to be able to test the cord without plug-in to AC wall voltage. Thanks

...iron in and mover the cord around. See if you can find the broken wire. Typically where the cord comes out of the iron and right at the plug. Or replace the whole cord. Your local hardware store, ...

your own question, simply disassemble the unit to remove the old cord and do an internet search or check local hardware stores for a replacement cord. This is much easier than posting on here for help

cord replacement if that is the case. Best idea is to scrap it in the blue box. If you are short of funds, try opening from the top and look at it as a learning experience. Oh with the plug not in the