Question about 2007 F-150 Harley Davidson
...Replace the solenoid, remove the rag and reinstall the cover. Be sure to remove the rag :o) That being said, the main cause of VCT codes or a noise from the VCT is caused by the camshaft phaser. This ...
...VCT solenoids with no help. They appear to be operational mechanically, but I have not yet checked to see if they are being pulsed. On the oil pressure issue: test the oil pressure with an external ...
2007 f150 w/p0022. They are recommending to me a new engine. The phasers supposedly have been replaced. Where is the extended warranty you were talking about? Thanks P0022 would be bank 2 over-*******
...VCT) had a peice of plastic stuck in it took it out so far so good P0011-A Camshaft Position-Timing Over Advanced or System Performance Bank 1 General Description The CVVT (Continuously Variable ...
2004 f150 runs rough replaced MAF, VCT solenoids, plugs and COP, one code says too lean bank 1, others have finally been cleared included too rich bank 2, misfire 2 and 3, misfire first 1000 revs. ...
...f150 has a slight knock when warm, code says too lean bank 1, shudders at idle, gutless. I already replaced plugs, coil packs, MAF, VCT solenoids 2 things. The most simple is an air leak in the ...
Question about 2004 F150
...VCT Solenoid Replacement P0012 indicates a problem with your variable cam timing sensor. www.youtube.com/watch?v=wxI5MH8uqbM I think your best bet is going to be talking to a mechanic about this. It ...
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions
