...the brake pedal, does the light come on? If yes, the solenoid is bad. The shifter will have to be
...if the car will start then. or just replace the solenoid with a new one and this will solve your problem. now the solenoid and the starter are one complete unit and need to be replaced together.
...VCT system circuit wiring and connectors, repair as required With a warm engine, test the operation of the OCV, replace/repair as needed A code P0128 may mean that one or more of the following has ...
...replace the solenoid, all other componets require some speclized test equipment.code P0106 manafold absolute pressure sensor ( MAP )check for a good vacuum source to the MAP sensor if there is a good ...
throttel postion sensors Had a code of po121. before that i replaced the purge solenoid car does not stay running at idel. have to keep restarting the car needs the throttle body cleaned and Idle Air ...
...replace the actuator solenoid and see how the engine runs. 4. If the actuator is working correctly, then most likely the phaser on the end of the camshaft is stuckRead more: 2002 chevy trailblazer, ...
vehicle operating conditions. Remove the transmission side cover. Refer to Control Valve Body Cover Replacement . Remove the 1-2 shift solenoid retainer clip (304), the 1-2 shift solenoid (305) with O
Question about 2009 Cobalt
...incorect timing.have u changed cam belt recently? sometimes you just need a solenoid replaced. an engine flush and solenoid replacement solved mine throwing the same codes and running ...
how do i change shift cylinoid on 2010 chev cobalt shift solenoids on 4T60 How to replace Transmission Control Module ...
How do I replace a shift solenoid in a 2006 Chevrolet Cobalt Videos in the link Elizabeth https://www.google.com/search?q=replace+a+shift+solenoid+in+a+2006+Chevrolet+Cobalt ..
Usually answered in minutes!
1,428 Questions
818 Questions
485 Questions
212 Questions
74 Questions