Question about 2002 F250 Super Duty SuperCab
turn. The problem has been traced forward of the pigtail. All fuses under dash are fine. Can't find the fuse block under hood. There's no block, just harness connectors. What to try to check next.....
Question about 2002 F250 Super Duty SuperCab
...THE HAZARD/TURN SIGNAL RELAY AT FIRST AND IT WENT AWAY FOR A WHILE BUT IT CAME BACK WITH THE SAME PROBLEM. WHAT IT TURNED OUT TO BE WAS THE WHOLE TURN SIGNAL SWITCH ON THE STEERING
turn signals and break lights. The tail lights do not come on with the head lights as well as the side running lights on the front of the truck. Could anyone help with this issue. check for a blown 15
seem to be any power coming out of the switch take the hazard button and tug and wiggle it real hard when pushing the brake pedal, if they start flickering, you will need a turn signal switch replaced
Question about 2003 F250 Super Duty Crew Cab
...a 2002 f250 brake lights dont work cab brake light works.turn signals hazard etc work except for brake lights replace your stop light switch its on the brake pedal Brake light switch at brake
Question about 2000 F250 Super Duty Crew Cabs
...replace the front turn signal lightbulbs in my 2000 Ford F250 Super Duty? There are 2 screws on the bottom side of the turn part of your truck. The orange or clear on some models. In between the ...
Question about 2003 F250 Super Duty Crew Cab
...Both relays turn on for brake lamps. The fuse #6 is more likely the problem. If the fuse is blown, replace it, wiggle the wiring on the trailer while someone steps on brakes to check for
...blinkers have stopped flashing. They still light-up but they don't flash. Verify both front & rear bulbs are lit up, when turn signal switch is on. If so the turn signal flasher needs
...brake lights run through the signal switch..Try hitting the brakes and move the switch around and see if your brake lights come on intermittently.. Check turn signal switch under steering ...
Question about Ford F250 F350 Crew Cab 04-08 Boss 12" Phantom Sub Box Ce1250m 1250w Amp
...turn signals on the truck are now not working. I checked the fuses and they are alright. The only other thing I can think of is the smart switch lever. Sounds like your flasher relay is away it's a ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions