Questions & Answers for: Geo Prizm replace timing belt

Question about Geo Prizm

1 Answer

...& does the spark plugs and wires make a differences No, it should make a difference if you replace the plugs and wires when it comes to your timing belt. It will not effect the timing belt at

Ad

Question about 1993 Prizm

1 Answer

...timing belt is warped how hard is it to replace it? can I just replace the belt? U should be able to just replace the belt and it should start ok, just make sure u look for any damaged pulleys or the ...

Ad

...replace the Timing Belt on my '91 Geo Prizm? Remove all nessary parts to access cover. Remove cover. Line up the timing makrs before removing old belt if car is still in running condition. Loosen the ...

Question about 1995 Prizm

1 Answer

...TIming belt. reassembled. 1-3-4-2 OK 4A FE engiine, Calfiornia Specs 91 Prizm; replaced Cam TIming belt because it jumped teeth, killing engine on road. No break but worn teeth. reassembled. with new ...

Question about 1994 Prizm

2 Answers

how many miles before i needt to replace my 94 geo prism timing belt? timing belt service is best done at about 80mile intervals Inspect at 30,000 and replace at 60,000 miles

Question about 1994 Prizm

1 Answer

...timing belt marks lined up and replce the pump and install a new belt as you reassamble the car and your good to go another 80 thousand miles. Replace the regular belts too and you'll have this ...

timing belt replacement diagram timing belt broke replacing but have evidence of clearance problems with belt contacting water pump to block bolt just behind the belt tensioner pulley and also showing

...timing belt and cant find timing marks Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt ...

Question about 1995 Prizm

1 Answer

...but will get the outer belts off if they get in your way. Also it is good information on major maintainance of timing belt replacement. Replace Timing Belt ...

...replace the spring. Reinstall the camshaft timing belt pulley, making sure the pulley fits properly on the shaft and that the timing marks align correctly. Tighten the center bolt to 43 ft. lbs. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1995 Geo Prizm
1995 Geo Prizm

421 Questions

1996 Geo Prizm
1996 Geo Prizm

286 Questions

1994 Geo Prizm
1994 Geo Prizm

276 Questions

1993 Geo Prizm
1993 Geo Prizm

205 Questions

1990 Geo Prizm
1990 Geo Prizm

189 Questions

Manuals & User Guides

Loading...