Questions & Answers for: Mazda replace timing belt

...it will cost you twice to fix it versus the one time fix. when you go in to the shop there should be no additional cost to replace the timing belt because it has to come off to replace the water

...replace your timing belt as regular maintenance. I usually will let the belt go to 80k for the 1st one. The rest of the time, I recommend replacing it every 60k. The reason being is that the factory ...

...timing belt ok, does not want to start 1993 1.6ltr / replaced the fuel pump as the old one was weak, have fuel/ have spark but replaced the plugs anyway/ timing belt is not broken/have compression ...

...by the timing belt. Replace the timing belt when you replace the pump. While its apart, replace the cam and crank oil seals, and check the bearing for the tensioner, it will need to be replaced

...all you have to do to stop the squeal is tighten the belt. Good Luck Hope this helps! Its not the timing belt, it it was, the engine would not run. Its your alt belt. Either tighten it or replace

...replace timing belt on a 1998 MPV?... When to replace timing belt on a 1998 mpv? The MFGR doesnt have a recommended interval for replacing the timing belt but 45-90k miles is most common for this ...

timing belt tensionerseized so replace it, and the timing belt, year? engine? you may want to replace the water pump at this time. and anything else that the timing belt turns.

...interval.WARNINGOn interference engines, it is very important to replace the timing belt at the recommended intervals, otherwise expensive engine damage will likely result if the belt

...timing replace tension& spring If you have replaced the spring loaded belt tensioner ( leave the pully nut loose ) then on refitting the belt , at a point midway between the two cam pulleys there ...

...replace_timing_belt_1994_mazda_929_3... 4 hours ago - how to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve... I have a 2000 Mazda 626 4cyl 2.0 liter DOHC engine replacing the timing ...