Questions & Answers for: Samsung CLP replace a thermistor

...for a long light bulb). I had the same problem with a CLP500 and bought a secondhand CLP510N and replaced the unit. Problem solved. Costs ? 40,= Still I think it's a terrible printer. When it ...

Samsung ClP-500 install cyann toner Recently my samsung clp-500 had a paper jam. I shut the machine down, there was not actual jam but, skipping that, I now get an install cyan toner error message. ...

Engine Fuser Low Heat Error I'm afraid that I'll have to take the printer somewhere to get a part replaced, but I thought I'd post this problem in case someone has some advice. The message I get is ...

...thermistor (heat sensor) on the fuser is burnt, or the low voltage power supply is not providing enough voltage to the fuser lamp. Your safest bet is to replace the fuser. BUT!!!! The printer itself ...

...is a thermistor that is causing the problem that can be serviceable in the fuser unit, that can be replaced instead of purchasing a whole new fuser assembly. It's less expensive replacing the ...

...I found part of my problem. Fuse 2 (5amp slo-blo) in the low voltage power supply was blown. Replaced it. Turn power back on and the component R3 (which is an inrush current limiting

...help you can lend. lamp,heat sensor,roller and gears. As long as the rollers is not damadged, the only other part I would replace is the thermistor unit that senses the temperature. That shoul do

Samsung CLP-600N displays message - engine fuser low heat error. Machine is out of warranty. Disassemble fuser and inspect thermistor, thermostat and heat lamp. Replace broken part.

...the fuse overheat error the printer stops with red light. Switch off for some tome or restart sometimes helps. Disassemble fuser and inspect thermistor, thermostat and heat lamp. Replace broken

have samsung CLP 510 printer and I find a problem Engine fuser low heat error Disassemble fuser and inspect thermistor, thermostat and heat lamp. Replace broken part.