Questions & Answers for: Jeep replace r134

...R134. It worked great for one day, then quit blowing cold again. Could it be the low-pressure cycling switch? If compressor isn't kicking in, check the connector atop the a/c accumulator, beside the ...

...replace the whole clutch assembly which comes with the a/c clutch coil, and bearings and the clutch plate i would suggest you to seek proffessional help on this one cause it needs special tools and ...

...would suggest not wasting your money on the refrigerant because if something in he system has to be replaced then the refrigerant you put in will have to be removed before any repairs are made. Hope ...

R134-A. I recently had to replace a leaky line on my A/C system. Fact is, they are getting a little older and things like seals and rubber lines are going to fail from time to time. If you replace the

...need to be changed the original expansion valve will work fine but the receiver dryer should be replaced and the system flushed with AC system flush and compressed air (condensor and evaporator), ...

THE AIRCON OF MY GRAND CHEROKEE IS NOT VERY COLD. I ALREADY REPLACED THE COMPRESSOR WITH A BRAND NEW ONE. have someone recheck the high side pressure and the low side pressure to make sure it is full ...

r134 before changing the compressor. Then simply return to them to have it returned to your system... Yes, but there usually isn't enough room to do it without removing the compressor from the vehicle

replace refrigerant; no cold air blowing ac lines under the hood carry r134 through the ac system. there are high pressure lines and low pressure lines. each side has an opening for service. it is not

...compressor would keep kicking on every 1-2 minutes even w/ A/C off, now does not kick in at all. Replaced low pressure cycling switch, no change. R134, shows full. Ideas? Any way to test the high ...

replace the filter. overcharging R134 makes the A/C weak, so avoid that. but do ask how to check it using the gauges, with humidity and ambient temp . tables. can do . the operator guide does not show