Questions & Answers for: Pontiac Montana replace power steering hose 2002

...replace power steering pump. whats the step by step way to remove and reinstall Remove the accessory drive belt from the pump Remove the pressure hose from the pump Remove the return hose from the ...

Ad

...power steering hose? on a 2001 pontiac montana where is the power steering hose? The power steering hose,goes down under the power steering pump,it goes directly down from the pump,and cuts under the ...

Ad

Question about 2000 Montana

1 Answer

...power steering system There's not a lot you can do for this other than replace the hoses. Try tightening down the hoses. Also, inspect them for cracks. If the hoses are tight and there ar no cracks I ...

Question about 2003 Montana

1 Answer

where is the power steering located Follow the two hoses from the bottom of your steering column (steering gear) to the steering pump. This comprises your power steering system.

Question about 2000 Montana

1 Answer

Replace power steering pump Remove the belt, there are 3 bolts that you have to remove through the openings in the pulley. Remove the power steering lines from the hold down bracket on the left lower ...

Question about 2002 Montana

1 Answer

...power steering, or the front suspension components involved in steering are locking up. take it to a dealer and ask for an estimate to fix it, then take that estimate to a private shop and ask them ...

replace the power steering pump in my 2002 pontiac montana Remove the drive belt, remove the 3 mounting bolts by using a socket ththrough the holes in the drive pulley. Remove the upper intake to give

high pressure hose on power steering pump 99 montana leaking Leaking high pressure hoses mean iminent failure get it replace as sonn as you can

...power steering hose replaced and the 2008 pontiac montana is whining like it was when there was no fluid in it what do I need to do to bleed the line? I think you damaged the steering pump by driving ...

...Replace power steering hose on 2003 Pontiac montana Very simple. Put the car on ramps. Remove the the fittings on both ends along with any clamps and remove the hose. Caution, these fittings can be ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...