Question about 1991 LeSabre
...plug wires replaced, also has the fuel filter been replaced every 30,000 miles as recommended by Buick? Replace plugs and wires at the same time to eliminate any carbon tracking from plug to
...the fuel system. The check engine light never comes on. Plug wires! If it miss fires under a load it's usually an ignition problem. Check the plugs and replace if necessary and replace the plug
wont turn on i have a 1967 buick lesabre i had no spark i replaced everything electrical including a new distritor now i have spark but still wont turn on There's a good chance you have "washed" the ...
change spark plugs Remove plug wire by twisting it off of plug. Remove plug and replace plug, push wire back on. One at the time.
...out. Clean/sand hole in head smooth and clean with brake cleaner to remove residue. 2 choices for replacement: use a rubber expansion type plug (easier) or a metal OEM plug like the one that came ...
...plug wires, and the coil mod and it still has not fix the problem any ideas would help. replace your distributor. if you already replaced the wires and the plugs and still the 2 cylinders do not work ...
Question about 1986 LeSabre
...plug problem, click the help links provided below: --- Car has no spark? http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html ------------ How to Replace Spark Plugs? ...
Question about 1986 LeSabre
...replace the plugs without replacing the wires. If the plug is carbon-tracked, the boots on the wires or the coil boots (coil-on-plug ignition) are also carbon-tracked. If you do not ...
replace drain plug 1997 buick lesabre how doi replace drain plug You Need A 14mm Wrench For The oil Drain Plug. The old Saying Is righty Tighty lefty Loosey.
...numbers do you mean the spark plug number that you use to replace the plugs or plug gap. the plug gap is .045". the plug number you can get the plug number from the auto supply store by
Usually answered in minutes!
1,731 Questions
1,603 Questions
1,084 Questions
904 Questions
897 Questions