Questions & Answers for: Chrysler replace a plug

...plug gap on the new plugs? Did you also replace spark plug wires? The stock ones are ok, but typically replacing them with a decent aftermarket wire (along with the plugs) makes a world of

...rear blower strong but cold.replaced relay no change replace restor open glove box uplug 4 wire plug and two wire plug put 12 volts two wire plug to mke sure fan works if it does replace ...

I need to replace the spark plugs on a 2005 Pacifica with a 3.5 l engine. Do I need to take off intake to do this. Also, besides spark plugs, what else will I need to buy/replace at the same time. I ...

unplug sensors, and vacuum hoses. Lift intake trying not to damage gasket, Remove plug wires one at a from valve cover. use long extension and plug socket.I would replace plug wires also.Leave comment

...replace spark plug wire need to no how to replace wire for spark plug...mix them up when i took them off...64 chrysler newport The firing order-------- 1-8-4-3-6-5-7-2 Looking at the engine from the ...

...plug problem,click the help links provided below :---Car has no spark?http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html------------How to Replace Spark ...

...plug was all corroded,should we replace the power pack censor seems to be working each time we replaced it I would replace all plugs first and see how it runs. If it has a miss, then I would start ...

plug and the wire to it. Replace and see if that works. Have the wires or plugs been replaced on the other cylinders in the past 12,000 miles? Go ahead...do it now before it gets to minus zero outside

...replace the plug in #1 cylinder without taking the car to my mechanic. The other 3 cylinders are fine - it's just #1 that has me worried. if the helicoil was installed correctly there should be no ...

...the plugs replaced. on the 3.8 liter remove the plug wires from the plugs one at a time and replace that spark plug. Place the wire back on the plug as soon as it is installed and move on to the