Questions & Answers for: replace pcv valve 2000 ford

Question about 2000 Explorer

1 Answer

...the PCV Valve to replace it pcv is located at rear of valve cover on drivers side.to remove turn counterclockwise then pull.be very careful because there are 2 small lock tabs to hold valve in

Ad

...PCV valve location? The PCV valve is located on the passenger side valve cover towards rear of engine. It will be on the valve cover, at the end of a hose, unless someone removed it. It is not on the ...

Ad

im looking for the pcv valve o a v6 ford f150 2004 The PCV valve is located on the passenger's side valve cover under a plastic bracket on top of the intake manifold halfway back

Question about 2002 F150 Regular Cab

1 Answer

...pcv valve on 2000 buick lasabre The PCV valve is hidden on top of the intake manifold down in a little enclosure. There are two small bolts holding the PCV cover. Often there is a fairly large vacuum ...

...condition. 2. Cracked distributor cap or possible moisture in it. 3. Check spark plugs 4. Perform fuel pressure test 5. Check your coil and ignition system 6. Pluged PCV valve or leaking EGT

Question about 2004 F150

2 Answers

pcv location 2000 f-150 Very back of engine on passenger side at the very end of the valve cover between valve cover and fire wall. i have a 2004 f150 5.4 the plugs were changed at just over 100, 000 ...

Question about 1997 F150 Regular Cab

1 Answer

...pcv valve located on the 5.4L engine 1997 Ford Truck F150 1/2 ton P/U 4WD 5.4L EFI 8cyl The PCV Valve is located: Under hood, center, upper engine area, top of engine, mounted in passenger side valve ...

...pcv valve 1991 F150 4.9L. Is building base pressure. The PCV valve goes in a hole in the top of the valve cover, and is connected to a hose. It is the only hole in the valve cover other than the oil ...

...PCV valve on 2006 ford f150 xlt Help I can't find the PCV valve on my 2006 f150 xlt PCV valve is normally located in one of the valve covers and connects to a vacuum source near the fuel intake ...

...in the sump max vacuum in an engine is 22 inches of mercury on hard deceleration and 15 "hg on idle to have vacuum in the sump indicates a faulty pcv valve so I would replace it with a known good ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...