...HVPS; replace the transfer roll if the continuity is correct. If there is no continuity, make sure the HVPS contact returns to its upward limit when depressed, and make sure the left bearing of the ...
...HVPS. If they look good I would replace the printhead. Roger if your toner is ok the HVPS has gone down and is causing the photodeveloper on the cartridge to not discharge hence black pages you ...
...replace the LVPS/HVPS. • If not open, then check the switch continuity across its conductors with the switch on. Turn the switch off. Plug the AC line into the LVPS/HVPS, and switch unit on. Please ...
...with the HVPS or abnormal output from the HVPS. To replace the Developers you would need to purchase a replacement Imaging Kit CLP-R300A. Any problems in the HVPS would require a factory
HOW TO REPLACE HVPS ON OPTRA T612 I need instructions for replacing the hvps Please see the attached photo for instructions on how to replace the High Voltage Power Supply for the Optra T Series.
Question about Optra T612 Laser Printer
I need instructions for replacing the HVPS on Lexmark optra t612 How do I change the HVPS on optra t612? Please see the attached photo.
...is due to Cyan A/C charge output error or a bias leak on HVPS. Could be a defective PCU or defective HVPS. Check charge connections to PCU, replace PCU and if this doesn't resolve issue, replace
...Check all the harness connections of the HVPS • Check spring-loaded AIO terminal installation behind the HVPS. • Replace HVPS. I sugest you try change cartridge first. Thanks a lot for
Question about Optra T612 Laser Printer
...HVPS. • Replace HVPS. Usually this error is related to the cartridge. Some manufacturers of compatible cartridges will replace the cartridge with a new one. At least they should give a discount based ...
...4. Replace the harnesses to the HVPS: C/B. 5. Replace the HVPS: C/B. Quoting from internet site below: ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions