Questions & Answers for: replace high pressure hose 2003

Question about 2003 Windstar

1 Answer

...2003 Ford Windstar under the front seat... passenger side i believe... no not inside the vehicle... under the van ...inside the frame rail... you need a special tool to remove the connectors on the ...

Ad

...high pressure side). I'm wondering what tools (other than a flare nut wrench) are required to replace this hose? Also, where exactly is the other end of the hose located (the end opposite the pump)? ...

Ad

Question about 1995 Windstar

1 Answer

...high pressure hose assembly is long and winds in and around the engine. Probably a real dog to replace. Bottom line is you need to locate the leak and that will determine which hose it is and whether ...

Question about 2000 Windstar

1 Answer

...replace it... 96 - 98 windstar 3.8 oil pressure switch is located under power steering pump. Remove serpentine belt and alternator. Remove PS pump pulley with special puller to get access to PS pump ...

Question about 2003 LS

1 Answer

replace powersteering line Work with me on this. There are two "kinds" of hoses. High pressure and low pressure. High pressure hoses have a high pressure fitting on each end. Low pressure hoses often ...

...high pressure hose twice in a months time. The hose keeps blowing the seal just before the threads where it screws into the pump? What can make this happen? Hi Brenda, I'm glad to help! Brenda, 3 ...

...replace the o-ring that prevents power steering fluid from escaping from the power steering pressure hose of a 2003 ford windstar. When you change the power steering pump, as you take the hose out ...

...pressure wood be my next thing and Last is the how many Km,s does it Have ?sounds like filter needs lookin at in the tranny if she,s got High Km,s if not then check the intake for leaks it,s Plastic ...

...replace the hose or fix the connection. Is there a hose diagram for the 2003 ford windstar? Most likely while you are in there it's time to replace the hose. Saves having to go back if it starts ...

Question about 2003 Windstar

2 Answers

pressure line on a 2003 Ford Windstar replace the sensor and the coupling and now the car won't start it was running perfect before I replaced the power steering pressure line Check battery cables and

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...