Questions & Answers for: Chevrolet replace control arm bushings

replace control arm assembly. unless u can get aftermarket I did the work last weekend. Bought the vertical bushings (aftermarket): they look like a hockey puck, and was able to replace the old ones..

Bushing came loose from 2007 Cobalt upper control arm. remove upper control arm and replace bushing

...control arm bushings in our 2006 Cobalt replaced under warranty. Car has only 26,000 miles. This has made the problem better but not solved it completely. I read other posts and it appears that more ...

...control arms making noise. are they easy to replace ? Can you replace one side only ? yes you can replace them one at a time and no they are not hard to replace but i would look at the bushings first ...

...control arm bushing i am trying to get instructions on replacing my upper control arm bushings on a 1985 chevy pu the a arms need to be removed, and the bushings pressed in and out , then you will ...

...replace the upper Control arms on My 1979 chevy 1/2 ton pickup. I saw a replacement control arm that has the bushings and ball joints already installed. I'm trying to save the high labor cost that ...

You can do this at home you do not need a press, but a large hammer. Most of the older one are press fitted.Most of the new one you replace the entire upper or lower control arms.What year do ya have

...control arm mounts to the frame you need to buy a new control arm or bushings.You get these at www.rockauto.com for about $50.00-80.00 or you can just replace the bushings for about $12.00 plus

HOW DO i REPLACE LOWER CONTROL ARM BUSHINGS ON 1998 SUBURBAN REPLACING PARTS WITH TORSION BAR SUSPENTION remove control arm remove old bushing and press in new one

...control arm did you replace the outer tie rod ends that hook to the knuckels This sounds more like a ball joint problem to me . I would look at the ball joints problem they are known to go on these ...