...Clutch master cylinder. However when first had problem did have loss of fluid in cylinder from Max to Min level. I just had the same problem today it was the master cyclinder its a common mazda ...
Replace both clutch slave and master cylinders, and bleed well. I've also had this happen. possible problem is a bad slave cylinder or needs bleeding or a bad master clutch cylinder Pull back the boot
Replace the clutch slave cylinder and re-bleed the system. It's pretty straightforward. I loosen the nut for the fluid BEFORE removing the bolts that secure the slave cylinder to the transmission. And
...gears. check under your hood for a another cap looks similar to a brake fluid resouvior see if its empty.if it is you probably blown the seal on your slave cylinder its what throws your clutch
I need to replace a Master Brake Cylinder for a 1989 Mazda B2200 truck. whats the problem?
...of fluid and there does not appear to be a leak you may need the clutch replaced if the clutch slave cylinder and master is working. CLUTCH GOING TO THE FLOOR COULD BE BROKEN RELEASE BEARING OR
1990 mazda b2200 clutch sticks to floor Check the fluid in the hydraulic clutch resevoir. Change the clutch master cylinder, if still sticks there will be need to also change the slave cylinder.
...stuck on the floor, 2001 mazda b2200 lost of oil on master or sleeve cylinder of your clutch full up and bleed the system .2nd one of your seals worn out or cylinder wall damage
mazda clutch on a 1990 b2200 replaced clutch , master cylinder slave cylinder still will not hold pressure what can it be loose connection leaking air, somewhere?
...
if the clutch master cylinder is full of brake fluid
master or slave is by passing
shift linkage out of adjustment
worn clutch or pressure plate damaged
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions