riccar model rad.7 upright (radiance). roller brush won't turn and red roller brush indicator is on. roller will turn easily by hand and belt is in place. how do i fix this? As you already know, the ...
riccar upright works great on floors, but there is no suction on the carpets. Any advice The reason it doesn't pick up on the carpets is because the belt is stretched or worn and can't turn the roller
...Riccar SupraLite Upright Vac used to glide across the floor so easily, but now we have to push it pretty hard. This just recently started. What can be wrong? Suggest you check the wheels to see if ...
...replace brushes ona ricca 8955 Your model can last well over 20 years. You might be able to change. The. Brushes yourself but there are adjustments that are difficult to do properly by the average ...
...replace the belt on my Riccar supralite vacuum and need instructions Lay the vacuum upside down, remove the bottom plate, remove the brush roll and belt, install new belt around motor shaft and brush ...
...new and brush roll spins fast when lowered onto carpet. It may need clutch adjusted or rubber pad
Upright beater brush will not turn Start by replacing the belt if it's over six months old. There is a clutch assembly that may have some wear. The clutch rubber pad assembly may be worn if the ...
replace belt on riccar 8925 Remove the bottom plate, remove the clutch switch lever, remove the brush roll. Install new belt and reassemble in reverse procedure.
Replace bearings on riccar vibrance The bearings in the brush roll can be replaced if. It has the metal brush roll. Remove the cotter pin to remove end caps and remove the shaft. Remove the plastic ...
riccar 8995 no suction cleaned out hose and all obstructions, brush spins, there is no suction at all. How do i fix this? Belt and brush work well. If it's been over a year since you've replaced the ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions