...replace anode rod. http://waterheatertimer.org/Replace-anode-rod.html Bacteria reacts with metal on anode rod, causing odor. Good news is that anode rod is still functioning, so water heater is not ...
Question about Water Heater Anode Rod AP12938
...Replace-anode-rod.html If anode is screwed into top of tank, then it will be under a plastic cap -or- it will be concealed under the top cover of tank. Look for plastic cap, and if none shows, then ...
Anode rod is usually replaced: http://waterheatertimer.org/Replace-anode-rod.html Tanks that have odor, because of bacteria reacting with anode metal, can be flushed with 2 pints of hydrogen peroxide
Question about W4 A.O Smith Gas Hot Water Heater Draft Inducer
...Replace-anode-rod.htmlFor easy access next time, you can remove old anode and plug hole, and then install combo rod.If longevity of tank is reason you are accessing the anode, you can add a second ...
...the top under the power vent.Otherwise, the anode can be a 'combo' and connected to hot water nipple.Copy following link for more ...
Question about W4 A.O Smith Gas Hot Water Heater Draft Inducer
...Replace-anode-rod.html 2) Anode might be located on hot water nipple as a combo. Insert carriage bolt when removing nipple to avoid collapsing nipple during extraction. Regular combo anode rods are ...
Question about W4 A.O Smith Gas Hot Water Heater Draft Inducer
...heater model HE40M06JAJOO? Either in a separate anode port on top of water heater, or connected to cold water nipple with combo anode. http://waterheatertimer.org/images/Replace-anode-rod.html ...
Question about W4 A.O Smith Gas Hot Water Heater Draft Inducer
...Anode rod? Replace anode rod, or remove anode rod, and clean tank with hydrogen peroxide (not bleach) Anode will keep tank from rusting. Cut new anode rod to correct length using hack ...
Question about W4 A.O Smith Gas Hot Water Heater Draft Inducer
.../waterheatertimer.org/Replace-anode-rod.html harmless bacterial reacts with anode rod anode protects tank from rusting change anode, or remove anode, or treat tank regularly with hydrogen peroxide ...
Question about ruud g100-200 water heater,gas,100 gal,199,900 btu
...gas water heater either in the anode port on top of water heater, or connected to hot water ****** as a combo ... or both if unit has 2 anodes http://waterheatertimer.org/Replace-anode-rod.html ...
Usually answered in minutes!
335 Questions
282 Questions
267 Questions
250 Questions
267 Questions