Questions & Answers for: removing sump

Question about 1996 Escort 4 Door

1 Answer

removing a sump pan how do i remove a sump pan from a 1.6 1996 ford zetec engine. you drain as much engine oil from them sump as you can by undoing the 13mm sump plug. you then undo all the bolts ...

Ad

Question about 2005 New Beetle

2 Answers

Taking the sump off a 2005 1.6 beetle I am trying to take the sump of to repair it but cant get at the last two bolts which are at the flywheel. cannot say i have done one but the golf and polo come ...

Ad

Question about 2005 Bantam 1.3i

2 Answers

how do i remove the oil pump i cant seem to get the sump off how cut off maltipals traeking systim If you have unbolted the sump and can get your hand and spanner in between to undo the oil pump ...

how do i replace the sump on a hyundai accent Remove Exhaust pipe, remove all bolts around the sump. (10mm size). Sump will still stick, because there is no gasket. Its like glued on with silastic, ...

Question about 2009 Captiva 2.0D

2 Answers

remove sump chevrolet captiva 2.4 petrol how do i get the sump out sump what sump. are you asking an engine question? what is wrong?, tell the story, or at least a tiny hint so we can get on the same ...

Question about 2009 Captiva 2.0D

1 Answer

remove base plate on a 375 sprint do you mean the sump pan? if so just remove th engine from the machine remove the blade boss.undo all the sump bolts( think they are 3/8" ) and remove the sump ...

Question about 1/2-HP Cast-Iron 83 GPM Submersible Sump Pump 56285-UTL1

1 Answer

impeller runs, no water comes out. Removed output hose, air is blowing out when removed from sump. Remove bottom cover, check for clogged intake holes, and make sure the impeller is solidly attached ...

Question about 1/2-HP Cast-Iron 83 GPM Submersible Sump Pump 56285-UTL1

1 Answer

How do I set old pump to remove and install in another Toyota same motor remove all of the sump bolts use a paint scraper or flat blade to break the adhesive sealant used in engine assembly remove the

I have a 2010 mazda3 Diesel. I think the oil pickup filter is blocked. How easy is it to remove the sump to clean it? It's pretty easy but you'll need to work under the vehicle, so make sure that the ...

How can i remove sump all bolts remove front lose back stuck depending on where the sump is you may have to remove other components or bracing to allow you to take out the sump if you've removed all ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...