Questions & Answers for: removing the motor cover Vacuums

Question about Smartvac 7975 Vacuum

1 Answer

the belt pulley and remove the fan. If there is no cover covering the fan, then you will have to remove the top, take out the 4 screw holding the motor and turn motor over, then you can remove the fan

Ad

Question about Smartvac 7975 Vacuum

1 Answer

motor to my sanitaire vacumm sc887-b From the bottom, remove the the fan cover and fan. Then remove the top cover, it is held on by 2 springs that you remove from the bottom, and then the screw in the

Ad

Question about Cyclone XT Upright Vacuum

1 Answer

...lens over the headlights. under the foil are two screws holding the top cover on. just lift carefully and the back of the cover pops off. the motor is easily removed, just one screw holds it in

Question about Cyclone XT Upright Vacuum

1 Answer

...motor cover? how to remove the motor cover on an electrolux 350E vacuum cleaner? There are 2 screw under the removable outlet cover and 2 more under the shiny label under the booster slider. Pick off ...

Question about Cyclone XT Upright Vacuum

1 Answer

...motor cover removed? How is the motor cover of an Electrolux z4494 removed? Two screws at the front, accessed by opening the dust bag lid. Two screws at the rear accessed by prising off the on/off ...

Question about Cyclone XT Upright Vacuum

1 Answer

...cover can be removed. Keep an eye out for screws that may need to be removed from time to time on some of the covers. They should be fairly self-evident when they're there. This should put you into ...

Question about 8955 Upright Vacuum

1 Answer

motor. When you remove this cover tpyou will be able to see into the fan of the lower direct air motor to remove the obstruction. If it is in too far. You may have to pull the motorand open up the fan

Question about 8955 Upright Vacuum

2 Answers

...motor cover doesn't come off? heres a manual it should tell you how to do it :) http://media.riccar.com/manuals/8900_Series_Manual.pdf The exhaust filter is under the cover on top of the motor cover. ...

Question about DC17 Animal Bagless Upright Cyclonic Vacuum

2 Answers

...motor cover (hard to turn). Then a black and a white wire go into the unit. The wire cover can be removed with one hex screw but you still can't disconnect them. You have to remove the housing on the ...

Question about Radiance Upright Vacuum Cleaner Bags

1 Answer

...motor. Remove the screws to remove this cover which gains access to the air path and fan of the direct air motor. It's possible you may need to remove the direct air motor to clean out the fan if it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...