Questions & Answers for: removing moen towel bars

how do I remove the towel bar from the wall? My contractor installed a 24" Rockland towel bar. I now want to remove it so that I can paint the wall. I can't find the instructions, and I can't remove ...

...Removing the towel bar is fairly easy. Use a small flat screwdriver that fits in the hole, and lever the tab towards the wall.

There is a screw underneath that can be tightened and if that ...

...Towel bars usually have a base that attaches to the wall with a screw. To expose the screw, you must loosen and or remove a small screw on the underside of the mounts. Once the screw is exposed just ...

My Brantford towel bar is loose. How do I remove My Brantford towel bar is loose. How do I remove from the mounting posts to tighten? There are some tiny screws under the posts. Loosen them and lift ...

...removing my Moen towel bar to paint my bathroom. Is there a special tool needed to remove it? Please help. First off you need to pry off the cap thats facing you (most models). Then there should be a ...

...MOEN Gilcest towel bar, I can remove the set screw and nothing comes loose to attach it to the wall. What am I missing ? Sorry to read about your problem, I hope this helps you out. remove the ...

...Moen towel bar. It has a tab under the bottom but I dont know what to do There should be a "set-screw" (a very small screw) at the bottom of base (fat part) of the towel bar. It screws in to hold the ...

...you remove the eva towel rack holder The Moen YB2824 is attached to the mounting bracket with a set screw through the base. You would simply need to loosen this set screw to remove item from the

Can't get the Moen Eva towel ring fixture to release so I can move it. check underneath for a small setscrew. back this out and it should be removable

...Removing the towel bar is fairly easy. Use a small flat screwdriver that fits in the hole, and lever the tab towards the wall. There is a screw underneath that can be tightened and if that works, ...