Questions & Answers for: Canon CanoScan removing glass

Dirty Glass How do I open the scanner to clean the glass within? The answer was very simple actually. I just had to remove the cover by pressing the plastic "wings", and found at the bottom of the ...

removing the glass ( no screws visible). How do I get to the underside of the glass? I would not worry about the underside of the glass unless you are having problems. The focal length of the ccd that

Cleaning Canoscan 9900F glass Hello. Could you please describe the procedure for removal of the glass (or is it perspex) from the Canoscan 9900F in order to clean it both sides. I have had it done ...

...removing and cleaning the glass plate? No problem. 1st step. Remove the lid. It just pulls out at the hinge end by lifting straight up, horizontal if you like. Where the two lid posts insert in the ...

I have a CanoScan Lide 90 and the scanner bed is jamed and yes it is unlocked had the same problem. take off the two framing pieces of plastic that run along the edges of the glass (they are stuck on ...

Fog build up on underside of glass plate. Scanner is Cannon 8600. On the underside of the glass plate there is a visible build up of fog or dust. What do I do to resolve this? Any solutions to this? I

I have a Canon LiDE 60 need to open scanner. How do I open it? cant find screws to open I just fixed my lide50. The data cable on the left was getting stuck when the scanner was halfway the page. I ...

How to pick off glass of canoscan 9950F I want to clean the dirt on the lamp and the inner side of glass please HELP Unplug power source. Disconnect cable connecting the lid to the base. Remove the ...

I want to remove glas of CanoScan LiDE 25 Flatbed Scannerfor cleaning Why? It shouldn't be dirty behind the glass. If the glass is dirty wipe the glass with a cloth dabbed in methylated spirits.

lHow to clean under side of glass plater note where the dirt is located,unplug all wires from back, remove top hinged cover, undo 2 screws at the top, remove cover plate by gently tipping toward top, ...